Depth Charge: Underwater blast: a muffled flash, a pressure wave and a gas bubble that collapses and rebounds, then a dome of bubbles rises and erupts through the surface as a spray plume.

Depth Charge

Underwater blast: a muffled flash, a pressure wave and a gas bubble that collapses and rebounds, then a dome of bubbles rises and erupts through the surface as a spray plume.

Depth Charge is an HD effect that loops seamlessly every 2.8 seconds, drawn on a 320 by 420 canvas. It is built from 12 particle emitters. Most layers blend additively, so it glows on dark backgrounds.

Free download with a transparent background, cropped to the effect, 84 frames at 30 fps. Use it in commercial games, no credit needed.

Licence: use it in any project, including paid commercial games such as a game sold on Steam. There is no per-project licence to buy and no credit needed. Terms.

Roblox: the download is a flipbook for a ParticleEmitter. Set FlipbookLayout to Grid8x8, FlipbookMode to OneShot and Lifetime to 2.8, then emit one particle per cycle. Roblox setup.

REMIX WITH AI

Try:

Left empty, it just opens in the agent, free. Each change is one AI build, and you start with free builds.

Engine data for Unity, Godot, GameMaker and Aseprite comes with a plan: open it in the studio.

OPEN IN THE STUDIO

Change the colours, timing or size, or export for Unity, Godot 4, GameMaker, Phaser, PixiJS and Aseprite.

Try variations: new colours, motion and shapes of this effect, free in the studio.

FRAME BY FRAME

8 evenly spaced moments across the 2.8 s loop.

Depth Charge at 8 moments, from 0 s to 2.45 s

HOW IT'S MADE

Depth Charge stacks 12 particle emitters, each with its own job. Techniques worth a look: sub-emitters set off by other particles, collisions, particles stretched along their motion, keyframed parameters and post filters (bloom). 2 scene layers (ground and props) show in the studio for context and stay out of every export.

It loops seamlessly every 2.8 s, and 8 of its layers fire in bursts, so it pulses instead of flowing evenly. Start times are staggered from 0 s to 1 s, so the layers arrive one after another. To change its colour, select "Plume Mist" in the studio and edit Colour A and Colour B. Size on the same layer sets how big its particles are.

Layers, in draw order

  1. Silt CloudparticlesOne burst of 16 smoke puffs from a disc at 0.04 s. They grow as they age and slow down with drag. Colour: deep cyan.
  2. Bubble Fireparticles / additiveA single particle at the start. Colour runs from white to orange over each life.
  3. Gas Bubbleparticles / additiveA single particle at the start. It swells and then shrinks away. Colour: pale cyan.
  4. Pressure Waveparticles / additiveA single particle at the start. It grows as it ages. Colour: pale cyan.
  5. Bubble Domeparticles / additiveOne burst of 90 bubbles from a ring at 0.02 s. They set off "Surface Foam" on impact, float upward, vanish when they hit something and sway from side to side. Colour: pale cyan.
  6. Fizzparticles / additiveOne burst of 70 bubbles from a disc at 0.02 s. They float upward, vanish when they hit something, sway from side to side and slow down with drag. Colour: pale cyan.
  7. Bubble Columnparticles / additiveA stream of bubbles from a disc, its rate keyframed over the loop. They set off "Surface Foam" on impact, float upward, vanish when they hit something and sway from side to side. Colour: pale cyan.
  8. Surface FoamparticlesSmoke puffs set off by "Bubble Dome" and "Bubble Column". They grow as they age and slow down with drag. Colours range between white and pale cyan.
  9. Plume MistparticlesA stream of smoke puffs across a box, its rate keyframed over the loop. They fall under gravity, vanish when they hit something, grow as they age and slow down with drag. Colours range between pale cyan and cyan.
  10. SprayparticlesA stream of streaks across a box, its rate keyframed over the loop. They fall under gravity and vanish when they hit something. Colours range between white and pale cyan.

2 more layers are in the studio.

DETAILS

Length
2.8 seconds, seamless loop
Canvas
320 x 420, HD
Layers
12 emitters
Blend
Mostly additive (glows)
Colours
pale cyanwhitedeep cyancyan
Sprites
Kenney Particle Pack by Kenney (CC0), Kenney Smoke Particles by Kenney (CC0)
Tags
explosion, underwater, depth charge, bubbles, naval

USING IT IN YOUR GAME

Phaser, PixiJS
The PNG sheet is a plain grid of frames that both can slice. A TexturePacker JSON atlas comes with a plan, from the studio.
Unity
Import the PNG sheet as a Sprite with Mode set to Multiple and slice it, or open the effect in the studio for a ready-made grid.
Godot 4, GameMaker, Aseprite
Open it in the studio and pick your engine in Export: with a plan, it writes the files that engine imports.
Web and chat
The GIF plays anywhere; the APNG keeps soft edges on any background.
Blend mode
This effect is made of light. For the same glow in your game, draw the sprite with additive blending, or export it on black from the studio for additive shaders.

Step by step: Unity, Godot 4, Roblox, GameMaker, Phaser and PixiJS, Aseprite, Web games (live runtime). Drawn with additive blending: see glow effects without a black box.

MORE Explosions

YOU MIGHT ALSO LIKE

All Explosions effects or the full library.